大连附近有没有服务

Industry trends

The steel gate structure is reasonable, which can meet the space of high height and span

Source: admin Release time: 10:29, October 10, 2019 Number of visits: second
steel sluice gate The structure is reasonable, which can meet the space of high height and span.
The gate is used to close and open the control facilities of the discharge (discharge) channel. As an important part of hydraulic structure, it can be used to intercept water flow, control water level, regulate flow, discharge sediment and floater.
Structure and composition
The door is mainly composed of three parts:
1. The main movable part used to close or open the orifice, usually called gate, also known as door leaf;
2. Buried part;
3 turn on and off the device.
A water stop plate and a movable supporting member, for example, a traveling plate and a supporting member. The embedded parts include main hole, guide rail, hinge seat, threshold, bottom beam, water stop seat, etc. they are embedded around the hole and firmly connected with the concrete of hydraulic structure. The anchor rib forms a support on the door leaf respectively. These parts and sealing surfaces are used to transfer loads such as water pressure to the hydraulic structure of the door leaf structure and to obtain good sealing performance of the gate. The opening and closing mechanism is connected with the door leaf lifting lug to operate and control the position of the movable part, but some doors are opened and closed by hydraulic automatic control operation.
When designing the steel gate, the structure is very reasonable. It is not only evenly distributed, but also can meet the requirements of large height and span space. What's more, it can save a lot of usage and raw materials, and it doesn't need to be designed on the gate. Door slot, so the price of installation is more affordable, and its advantages are consistent with the use of many places.
When designing the steel gate, the structure is very reasonable. It is not only evenly distributed, but also can meet the requirements of large height and span space. What's more, it can save a lot of usage and raw materials, and it doesn't need to be designed on the gate. Door slot, so the price of installation is more affordable, and its advantages are consistent with the use of many places. Steel gate can be made into plane steel gate. Flattening is a steel door, a curved steel door. The machine door is made of steel. It can also be a large steel gate. Can be made according to customer needs. It can be used for anti-corrosion and anti-corrosion. Long service life, no water seepage.
Our factory has more suitable products for you, can produce cast iron gate, inlaid copper cast iron gate, single and double sluice, steel gate, flap door, side door and other shooting materials, as well as various types of hoist hoist, screw hoist, various types of hoist, radial gate, various hoist gate, as well as various cleaning machines, conveyors, garbage racks.

Last article: Temperature requirements of FRP flap door during plastic spraying

Next: There are several types of cast iron inspection standards for cast iron gate